基于Stateflow电力机车变流器控制设计与实现

某出口型号交流电力机车牵引控制系统要求变流器控制逻辑具备接触器控制、牵引系统数据交互、变流器故障保护、变流器启动自检等功能。针对以上功能,基于MATLAB中的Simulink/Stateflow可视化编程工具进行牵引控制模型的搭建,遵循模块化编程理念,采用较少的程序代码编写实现复杂的逻辑控制模型,生成逻辑清晰的控制功能流程图,进行半实物仿真测试,增强控制模型的可靠性。通过该变流器产品型式试验检验,验证变流器控制逻辑的功能可以满足控制系统的需求。     

烟气CO2捕集热能梯级利用节能工艺耦合优化

醇胺法捕集CO₂技术是一种较成熟的CO₂捕集技术，具有吸收速度快、脱除效果好等显著优点，但其操作费用高、解吸能耗大。本文以降低醇胺法捕集烟气中CO₂系统再生能耗为出发点，对常规醇胺法捕集CO₂工艺统进行了节能优化研究。在常规工艺流程基础上引入压缩式热泵节能技术，并利用Aspen Plus软件建立了基于压缩式热泵技术的CO₂捕集工艺流程模型。研究了压缩式热泵与机械蒸汽压缩回收（MVR）热泵、分流解吸、分布式换热、级间冷却4种节能工艺耦合，通过模拟计算与优化，结果说明了最佳节能工艺组合为“解吸塔压缩式热泵+贫液MVR热泵+分流解吸+级间冷却”耦合的CO₂捕集工艺流程，当解吸塔顶气体分流比为0.25∶0.75、冷富液分流比为0.05∶0.95、级间冷却器位于吸收塔17块塔板位置、吸收塔输入冷量为-3.0GJ/h时，系统再生能耗最低，为2.533 GJ/tCO₂，相比常规有机胺工艺（再生能耗4.204GJ/tCO₂）节能率39.748%。     

楼宇型分布式能源系统设备容量和运行策略优化研究

设备容量优化和运行策略优化是分布式能源系统设计，运行的关键问题。为实现分布式能源系统的经济效益，能效水平和环境效益最大化，针对楼宇型分布式能源系统建立了相对普适化的物理模型和数学模型，以粒子群优化算法和线性规划相结合，采用两阶段优化方法计算系统的最优容量配置，并给出运行策略。以某写字楼的分布式能源系统为例，得到最优的系统设备容量和全年逐时运行策略，并采用遍历法验证计算结果的准确性。优化的分布式能源系统与传统供能系统相比，费用年值降低7.79%，年总能耗降低24.18%，污染物排放量减少了62.77 %。     

基于PSCAD/EMTDC软件的高压直流输电仿真教学研究

针对“高压直流输电”课程教学过程中,高压直流系统控制原理复杂抽象,直观上难以理解的特点,本文通过运用PSCAD/EMTDC仿真软件,基于CIGRE HVDC标准测试模型,对高压直流输电系统在整流侧和逆变侧交流系统分别发生故障时的运行特性进行仿真测试。教学实践表明,PSCAD/EMTDC软件的应用加强了学生对理论知识的理解,激发和培养了学生的学习兴趣和动手实践能力,有效地提升了教学效果。     

铝合金三角形波纹夹芯板对平头弹抗冲击特性数值模拟研究

为研究铝合金三角形波纹夹芯板对平头弹体的抗冲击性能及损伤特性，利用有限元软件ABAQUS/Explicit建立弹体冲击靶板的数值模拟模型，并结合实验验证了模型及其参数的有效性。基于数值计算结果，分析了三角形波纹夹芯板几何结构对其防护性能、失效模式和能量吸收的影响规律及机理，并与等面密度单层板进行对比分析，研究结果表明，靶体几何结构对其抗冲击性能存在影响，三角形波纹夹芯板抗冲击性能低于单层板抗冲击性能。此外，增加芯体拓扑结构夹角能显著提高三角形波纹夹芯板的抗冲击性能，并且靶板几何形状会对其失效模式及耗能特性存在影响。     

Domestic demand-side response with heat pumps: controls and tariffs

ABSTRACT

Electric heat pumps feature prominently in projected energy transitions in the UK and elsewhere. Owing to their high electricity consumption, heat pumps are viewed as important targets for demand-side response (DSR). Findings are presented from a field trial of a new control system that aims to optimize heat pump performance, including under time-varying tariff conditions. The trial involved monitoring 76 properties with heat pumps, but without dedicated heat storage; 31 of these received the control system. Interviews were conducted with a subsample of 12 participants. The controller successfully evened out electricity demand over the day (reducing the evening peak), but this was associated with increased late night and daytime temperatures. Interview participants reported some disturbance owing to overnight heating and noise, as well as usability issues with the controller interface and hardware. These issues present risks to the future acceptability of such systems. While the system delivered short-term demand reductions successfully, longer-term demand shifting risked causing unacceptable disturbance to occupants. Future control systems could overcome some of the issues identified in this pioneering trial through more effective zoning, using temperature caps or installing dedicated heat storage, but these may either limit the available flexibility or be challenging to achieve.     

Structure variation and energy storage properties of acceptor-modified PBLZST antiferroelectric ceramics

Energy storage capacitors with high recoverable energy density and efficiency are greatly desired in pulse power system. In this study, the energy density and efficiency were enhanced in Mn-modified (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃ antiferroelectric ceramics via a conventional solid-state reaction process. The improvement was attributed to the change in the antiferroelectric-to-ferroelectric phase transition electric field (E_F) and the ferroelectric-to-antiferroelectric phase transition electric field (E_A) with a small Mn addition. Mn ions as acceptors, which gave rise to the structure variation, significantly influenced the microstructures, dielectric properties and energy storage performance of the antiferroelectric ceramics. A maximum recoverable energy density of 2.64 J/cm³ with an efficiency of 73% was achieved when x = 0.005, which was 40% higher than that (1.84 J/cm³, 68%) of the pure ceramic counterparts. The results demonstrate that the acceptor modification is an effective way to improve the energy storage density and efficiency of antiferroelectric ceramics by inducing a structure variation and the (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃-xMn₂O₃ antiferroelectric ceramics are a promising energy storage material with high-power density.